You can also filters by group type(s) and location(s).
Part 1: Finding these filters
 | Step 1: After you log in, click on Groups (orange highlighted tab in image to the right).
Your Groups page will open. |
 | Step 2: Choose the group view you wish to modify. |
 | Step 3: If you are not already in the Setup tab, click on Setup (brown box in image to the left). |
Step 4: Scroll down until you see Filtering.
Part 2: Setting these filters
| Add filter (turquoise box in image to the left): This is where you organize your main filtering. You use the connectors 'and' + 'or' to mix and match between your PCO group types, locations, tags, tag groups, and group statuses.
This filtering logic is powerful (and a little complex). So we have given it its own article: https://help.display.church/en/articles/7890338-setup-events-filtering-logic
NOTE: The default is All Group Types / All Locations / All tags / All tag groups / Group status = Open. In other words, if you do not select any filters, Display.Church will pull in PCO groups from all your group types, locations, tags, and tag groups provided those groups have a group status of 'open'. |
Group type Location Tag | Choose from the group types, locations, tags, and tag groups you have set up. |
 | Group status: Choose between open, closed, full, and private. |
 | Click on the blue Update button at the bottom to save your selections.
|